SK6900 & SK6900TV
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhfitness.com • Phone 949-206-8152 • Fax 949-206-0013
43
SK6900 COMPUTER CONSOLE
GENERAL INSTRUCTIONS
The electronic monitor is designed to be easy and intuitive to use. The messages that appear
on the bottom screen (B) will guide the user throughout the whole exercise.
Operation of the Electronic Monitor is explained here.
NOTE:
The monitor will switch back to stand-by mode after 4 minutes if no keys are pressed.
The monitor can be switched back to READY by pressing the STOP key.
STARTING
Plug the treadmills power cord into a 110 – 120 V grounded wall outlet as shown on Figure (B)
Switch (b) is located on the lower front of the main body. Set Fig (A) switch (b) to position [1].
Once the monitor is on it will display the profile and the letter “M” for manual on the LED array
(Figure 1, area A), and the “WELCOME TO HI - POWER” welcome message on the bottom
alphanumeric screen (B).
To start manual mode, pressing the QUICK / START key. After a 3 second countdown, the
machine will start at a speed of 1.2 mph (2 km/h). The speed settings can be increased or
decreased by pressing the LEVEL
▲
OR LEVEL
▼
keys or by using the numeric keys (Figure
1, area F).
Figure (B)
