BH FITNESS SK-9000, Руководство пользователя, Страница: 24 / 43

BH Fitness SK9000B
Page 23
CONSOLE OPERATION
CONSOLE SELF TEST
Press and hold the RESET key and the 0 key at the same time for 3 seconds until “FACTORY
SETTINGS” appears on the alphanumeric screen (B), Figure 20. Press “1” key and “PRESS
ENTER” will display. Press the “ENTER” key to enter the following options of the test mode.
1. Software finished date: After entering the test mode, the date when the software was
finished will be displayed “SW VER “. Press “ENTER” key to enter the Dot Matrix
and LED light test mode.
2. DOT Matrix and LED light test mode test if the screens light normally. Press ‘ENTER’ key to
enter the RPM test mode.
3. RPM test mode will display “TESTING RPM” followed by the RPM (Revolutions Per Minute)
while the bike is pedaled in order to test if the TPM function works normally. Pres the “ENTER”
key to enter the HR test mode.
4. HR test mode will display the “TESTING HR” heart rate while the handgrip pulse sensors
are held and the pulse signal is detected by the console. This can test if the HR test mode
works normally. Press ‘ENTER” key to enter the DAC test mode.
5. DAC test mode will display “TESTING DAC”. Press the LEVEL up/down KEY to change the
LEVEL. This can test if the DAC mode works normally. Press “ENTER” key to enter the test
mode.
6. Key test mode will display “TESTING KEY 1A”. Press any key on the console. A code will
display on the window with a Bi sound to test if the key function works properly. Press
“ENTER” key.