BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
RECOMMENDED AIR SUPPLY
No.
Description
No.
Description
1
Air Tool
6
De-Watering / Filter Unit
2
Air Hose
7
De-Watering Valve
3
Quick Coupler
8
Shut-Off Valve
4
Oiler (only required for air tools with
motor)
9
Dryer / Filter Unit
5
Pressure Regulator
10
Compressor / 11 De-Watering
Valve
SERVICE
•
Only operate the product on compressed air systems that have the correct air pressure and
sufficient air volume (L / min) for this tool.
•
Before using the compressed air device, put 4 to 5 drops of compressed air device oil into the
compressed air connection. The performance of the device depends on the size of the air
compressor and the compressed air supply volume.
•
The speed can be set via an air supply controller (not included in the scope of delivery).
•
The technical data of the tool refer to a working pressure of 6.3 bar.
•
Always be careful when using the Air Needle Scaler. In case of negligent operation, internal
components of the device can be damaged and the work performance can be restricted.
•
Press the actuation lever (trigger) to operate the tool.
•
Release the operating lever to stop the tool.
•
Do not remove any information labels from the device and replace damaged labels.
•
Keep hands, loose clothing and long hair away from the moving part of the tool.
APPLICATION
Note: Take the time to carefully select a work area.
1. Screw the needle head onto the impact hammer and secure it against loosening with the grub
screw.
2. Connect the pneumatic tool to the compressed air.
3. Place the needles on the surface at a 90° angle and press the trigger.
Caution: Thin sheets may warp.
