BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
COMPRESSED AIR SUPPLY
Use this cleaning gun exclusively on a compressed air source which provides filtered, oil free and
compressed air with regulated pressure, as well as with a sufficient compressed air volume (litres per
minute). Disregarding this may lead to damage to the compressed air cleaning gun or its components
and to a poor cleaning result.
COMPONENTS
1
2
3
4
5
6
7
8
9
Suction attachment
Suction nozzle
Fixing screw
Shut-off valve for cleaning agent
Trigger
Compressed air regulator
Handle
Compressed air inlet
Cleaning fluid container
10
11
12
13
14
15
16
17
Hose adapter Ø 33 - 35 mm
Hose adapter Ø 38 - 40 mm
Hose adapter Ø 40 - 42 mm
Hose adapter Ø 45 - 47 mm
Hanging hook
Funnel brush, blue
Sealing lid for the container (9)
Compressed air nipple for compressed
air inlet (8)
UNPACKING
When unpacking, make sure that all parts are present.
Contact your dealer if parts are missing or damaged.
SAFETY DURING OPERATION
Take your time to make a careful selection of the work area. Make sure that your workplace is in the
vicinity of a compressed air connection or the compressor.
Attention!
Stay aware. Remove devices or other objects from the work area. Persons and animals
may not remain in the work area.
Never direct the tool towards persons or animals.
Always wear safety equipment such as safety glasses and protective mask (see chapter Occupational
safety).
PREPARATION
Insert the compressed air nipple (17) into the compressed air inlet (8) and tighten this with approx. 2-3
rotations. Do not overtighten the compressed air nipple, a sealing agent has been applied to the
thread and only has to be tightened enough so that air no longer escapes.
