SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5 6
e s s a r t S r e s u k r e v e L
ax +49 (0) 2191 / 46438-40
e d . l h a t s w s
@
o f n i : l i a
M - E
d i e h c s
m
e R 7 9 8 2 4 - D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
8595
Valve - Assembly / Disassembly Tool Set
INDENTED USE
The tool set is designed for pressing down of the valve springs and for loading of the cylinder with
compressed air, thus enabling a renewing of valve stem seals without disassembly of the cylinder
head.
SAFETY ADVICE
•
Be careful when working on hot engines – risk of burn!
•
Be careful when working on running engines. Loose clothes, tools and other things can be caught
up in revolving parts which may lead to serious injuries.
•
Remove the ignition key before repair so that the engine will not start unintentionally.
•
This manual is just brief information and will not replace a workshop manual.
Always
consult specific service literature for information about torques, assemblies and disassemblies
etc.
•
When working with this tool always wear safety gloves and safety glasses
•
This tool is designed for removing valve springs. Use the tool only for those purposes. Other
inappropriate use may result in damage to the tool.
.
