SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5 6
e s s a r t S r e s u k r e v e L
ax +49 (0) 2191 / 46438-40
e d . l h a t s w s
@
o f n i : l i a
M - E
d i e h c s
m
e R 7 9 8 2 4 - D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
INFORMATIONS ON PERSONAL SAFETY
•
Always make sure that the gear is placed on park position and the parking brake is applied.
•
Always keep a dry chemical fire extinguisher (Class B).
•
Be especially careful at turning or heated vehicle components.
•
Do not smoke near gasoline components or the car battery.
•
Make sure when working on the car always have adequate ventilation. Exhaust fumes are
poisonous.
•
Never disconnect a power connection when the ignition is turned on, unless this is explicitly
mentioned in the instructions.
•
Do not touch the electrical connections.
•
Do not hang extension cords for power tools and hand lamps near, over or on a current
connection of the vehicle.
•
When bleeding the brake, use only the included container and observe the assembly
information, otherwise brake fluid can enter and destroy the vacuum pump.
OCCUPATIONAL SAFETY
Always wear suitable protective equipment when using this tool.
Always wear following protective equipment:
Anti-slip working shoes
Working gloves
Protection glasses
UNPACKING
When unpacking, make sure that all parts are present.
Contact your dealer if parts are missing or damaged.
INSTALLATION
Assembly for brake bleeding