Features:
MANUAL Model No.: KIRPOLAPHOT001
"
Polarized Sensor
"- totally safety sensor
Retro-reflective type
Red infrared led element
IP-55 water proof/cable gland
PC casing, anti fog/dew/rains
Round shape reflector-Dia.: 82.1mm
Input Volt.: 12-30V DC/AC 60 Hz
(Non Polarity)
Twin colors led indicator for beam alignment
Tamper switches included
Gateopener
Overhead door
Swing gate
Sliding door
Window
Terrace
Warehouse
Parking lot
Automation control
Application:
Specifications:
Input Volt.
Current consumption
Tx LED Element
Beam Spreading angle
Contact Capacity
Response Time
Delay Time of Relay
Sensing Range
LED Indicators
Additional Function
Wiring Connection
IP
Environment/Storage Temp.
Dimension
12-30V DC/AC 60 Hz (Non Polarity)
100 mA
Infrared LED/Wave length 740 nm
1.5 (half angle)
10 msec
100 msec
10 meters
Tamper switches
Terminal block / Cable gland (IP-55)
IP-55
-25
60 / -35
80
122 (L) 61 (W) 62 (D) mm
Red LED Off: Beam aligned / Red LED On: Beam broken
Red LED flash: Beam alignment signal weak (Re-align)
Green LED on: Beam aligned proper
1
Dimensions:
12
2
53
61
62
49
UNIT: mm
M12x1.5
3-6.5
12
9
18/15
Cable Range
(mm)
Thread O.D.
C1(mm)
Thread Length
C2(mm)
Spanner Size
A&F(mm)
Thread
Cable gland:
Cable wires
Approvals
2517 / 24AWG / 5~7 cores
UL325-2016 & CE
Nut
Body
Tight Ring
Knob
30VDC/AC, 0.5A
UL325-2016 MONITORED Photoelectric Beam Sensor
(Retro-Reflective & "POLARIZED" also Twin Finish Housing Type)
Note:
MONITOR functions of UL325
(01) End of Line Resistor (10K )
(02) N.C. contact (Optional)
Depending on the monitoring
system used by the gate motor, it
may be necessary to use either the
N.C. output or connect the included
10K resistor to the N.O. or N.C.
output.
Please refer to the gate operator
manual or the gate operator
manufacturer for the preferred
monitoring method.
RoHS
5002680
