44
- IANUS BT 300 KIT - IANUS BT 500 KIT
D812457 10550_02
FINAL CHECKS AND MAINTENANCE
Before the automated system is finally put into operation, and during maintenance work, perform the following checks
meticulously:
- Affix a door/gate identification plate, also affix a warning sign on the frame�
- Make sure that, during operation, mechanical risks are avoided or relevant protective measures taken and, more
specifically, that nothing can be banged, crushed, caught or cut between the part being operated and surrounding
parts�
- Make sure the motor automation settings are correct and that the safety and release systems are working properly�
- Make sure all components are fastened securely;
- Check starting and stopping operations in the case of manual control;
- Check that the rack and pinion mesh correctly with 2 mm of play along the entire rack; keep the track the gate slides
on clean and free of debris at all times�
- Make sure all safety devices are in good working order (photocells, sensitive edges, etc�) and that safety devices are
correctly adjusted�
- Impact forces can be reduced by using deformable edges�
- Make sure that the emergency operation works, where this feature is provided�
- Check opening and closing operations with the control devices applied�
- Check that electrical connections and cabling are intact, making extra sure that insulating sheaths and cable glands
are undamaged�
- While performing maintenance, clean the photocells' optics�
- When the automated system is out of service for any length of time, activate the emergency release so that the op-
erated part is made idle, thus allowing the gate to be opened and closed manually�
- The maintenance described above must be repeated at least once yearly or at shorter intervals where site or install-
ation conditions make this necessary�
GATE MOVEMENTS
Gate status
Radio START
button
or
START input
Radio
PEDESTRIAN
button
OPEN input
Opening limit
switch trigger
Closing limit
switch trigger
STOP input
Photocell trigger
Amperostop
trigger
(*)
Semi-automatic logic (TCA = Off) - 4 steps
Closed
Totally opens
If the gate is
closed (closing
limit switch) it
partially opens,
or fully opens
Totally opens
No effect
No effect
Inhibits
movement
Inhibits opening
No effect
During
opening
Stops opening
Stops opening
No effect
Stops opening
No effect
Inhibits
movement
Stops opening to
clearance
Stops and
movement
is reversed
for 1s
Open
Closes
Closes
No effect
No effect
No effect
Inhibits
movement
Inhibits closing
No effect
During
closing
Stops closing
Stops closing
Stops closing
and reverses
movement�
No effect
Stops closing
Inhibits
movement
Stops closing and
reverses movement
after clearance
Stops and
movement
is reversed
for 1s
Automatic logic (TCA = On) - 4 steps
Closed
Totally opens
If the gate is
closed (closing
limit switch) it
partially opens,
or fully opens
Totally opens
No effect
No effect
Inhibits
movement
Inhibits opening
No effect
During
opening
Stops opening
and closes after
TCA
Stops opening
and closes after
TCA
No effect
Stops opening
and closes after
TCA
No effect
Inhibits
movement
Stops opening to
clearance
Stops and
movement
is reversed
for 1s
Open
Closes
Closes
No effect
No effect
No effect
Inhibits
movement
Inhibits opening
No effect
During
closing
Stops closing
Stops closing
Stops closing
and reverses
movement�
No effect
Stops closing
Inhibits
movement
Stops closing and
reverses movement
after clearance
Stops and
movement
is reversed
for 1s
(*) If the motor finds a fixed obstacle, it runs the clearance manoeuvre�
Содержание IANUS BT 300 KIT
