P a g e
|
5
Output Connections Example
This example shows relay 1 connected to a gate motor controller for vehicle gates, and output 2
connected to a magnetic lock for a door or pedestrian gate.
Powering Up
Perform a final check of wiring and ensure the antenna is connected before switching on the
power. Once the power is switched on, the power LED should illuminate.
TIPS:
My GSM LED is still searching…
-Check the SIM card is registered and can make a
call in a phone.
-Check the SIM card is seated correctly. Power off,
clean the contacts on the SIM and the GSM unit,
and reinsert the SIM.
-Check power cable distance and thickness.
-Increase antenna height.
-Change network.
-Move antenna away from metal objects.
-Fit a high gain antenna.
Output 1
Output 2
Use 24v
dc PSU
C
OM
N
/O
C
OM
N
/C
Relay 1
Relay 2
(not supplied)12v dc
+
-
Other device
e.g. exit switch
Magnetic lock
Gate controller
COM
Start
Electric Gates
=1 bar
= 2 bars
= 3 bars
= 4 bars
= Processing
= Standby
= Connected
= Searching
