![BFM Futureglass State Console Conference Room Table Скачать руководство пользователя страница 1](http://html.mh-extra.com/html/bfm/futureglass-state-console-conference-room-table/futureglass-state-console-conference-room-table_assembly-instructions_2746098001.webp)
Contemporary furniture in glass
visit w
ww
ww
w..ffu
uttu
urre
eg
glla
as
ss
s..c
co
o..u
uk
k for information and support
please email any feedback to reception rre
ec
ce
ep
pttiio
on
n@
@ffu
uttu
urre
eg
glla
as
ss
s..c
co
o..u
uk
k
T
T +44 (0) 1376 330300
Thank you for purchasing the Futureglass
State Console Conference Room Table
!
The design of STATE allows easy tool free assembly by a competent adult.
The simple tool free assembly means that the table can be constructed in the
shortest of times.
Please take a few moments to read these instructions to get the most from
the table.
Futureglass is a proud member of
the Association for British Furniture
Manufacturers
1
1.. Never drag the table - Always lift with assistance
2
2.. Replace any damaged glass with that of identical
specification.
3
3.. Never place heavy objects onto the table.
4
4.. Use a suitable non-abrasive glass cleaner.
5
5.. Take care when moving the table.
6
6.. Take care in positioning the table.
7
7.. Never place hot pans onto the table.
8
8.. Avoid subjecting the table to impact.
9
9.. Never sit or stand on the table.
1
10
0.. The table is not suitable for rough use
1
11
1.. Always lift the table by the glass to move it, never
drag it or lift by the legs.
1
12
2.. In the unlikely event of breakage, a competent person
must clear thoroughly the area of sharp shards of
glass, which may cut.
The glass supplied is toughened to BS6206A for safety. In order to maximize this safety; please follow the following precautions.
ASSEMBLY INSTRUCTIONS
1
1.. Unpack all of the components, leaving the glass facing
down on a protective layer (preferably still in the
original packaging). The stainless steel bosses should
be facing up.
2
2.. For wood finishes, screw the grub screw into the
boss, leaving the allen head still visible.
3
3.. Screw the legs onto the stainless steel bosses,
twisting the legs in a clockwise direction.
4
4.. When the legs are screwed tightly, twist the legs on
final QUARTER turn so that they are square with the
bosses. (i.e. flat side of the leg with the flat side of
the boss).
5
5.. Then carefully, using assistance if necessary, turn the
table over onto the legs by holding the glass only. This
minimizes stress on the legs.