Beyerdynamic SIR 800, Руководство по эксплуатации

Страница: 12 / 24

SIR Infrared System SIR 800
10
4. Installation and starting up
The Compact Transmitter has an ex-works mains voltage setting of 90 - 250 Volts by 50 / 60 Hz.
If there is another voltage range you must not connect this equipment. In connecting the system,
special attention is to be paid to ensure that all cables are installed in cable ducts or that they are
fixed by cable clamps or adhesive tape in such a way that there is no danger of somebody tripping over
them.
When installing several SIR 800 above each other, leave 1 U at least free between them.
If the SIR 801 radiator is mounted to the ceiling, please use a safety rope to protect it from falling down.
4.1 Connecting the LINE-IN socket
XLR LINE-IN connector (female): socket for feeding in the original channel or the target
languages.
4.2 Connecting RF-LINK socket
BNC socket for cascading another compact SIR 800 transmitter: To manage more than
8 Outputs you can extend the SIR system with 16 or more line outputs.
4.3 Connecting radiator sockets
BNC 1 and BNC 2: BNC sockets for connecting SIR 801 radiators. Up to 10
radiators can be connected directly.
If there are more radiators needed we recommend using an active CA 5214
distributor.
4.4 Connecting mains power
Connect the delivered cable with this socket to ensure the proper working of
the Compact Transmitter.