F
EATURES
• Metal plate with Nextel
®
finish
• Round edges for flush table mounting
• High-quality gooseneck microphone (including pop shield)
• Ring of the gooseneck illuminates to indicate the
Ready-to-Talk status
• Microphone button to switch the microphone unit
on and off or for request to talk
• Dual colour LED to indicate the microphone on/request-to-talk
status (red: request-to-talk is acknowledged;
green: microphone unit is switched on and ready to talk)
• DIP switches for addressing and programming the
microphone unit
• 15-pin Sub-D socket for the system connecting cable
• Fixed connecting cable (3 m long) with 15-pin Sub-D plug
• Place to keep pens
D
ESCRIPTION
The MCS 501 delegate microphone unit consists of one microphone
button in the cover plate with which the participant can switch on
and off the microphone, an illuminated red ring below the micro-
phone capsule and a green LED above the microphone button
indicate the ready-to-talk status of the microphone.
In the Request-to-Talk mode, the microphone button enables the
Request-to-Talk function. The red LED above the microphone
button indicates the Request-to-Talk has been acknowledged.
When the microphone is activated by the operator at the PC,
media control system or chairman station with “Next” function,
the colour of the LED changes to green. If the microphone button
is pressed once again, the delegate himself/herself can clear the
request-to-talk.
The round edges of the unit allow flush table mounting.
A
RCHITECT
’
S
S
PECIFICATIONS
Digitally controlled delegate microphone unit for mounting into
a table with one button for switching on/off or request-to-talk.
Dual-colour LED: green indication for microphone on and red
indication for request-to-talk. Fixed condenser gooseneck micro-
phone (back electret) with cardioid polar pattern. Total length
400 mm and diameter 8 mm. Illuminated ring below the mic
capsule to indicate the ready to talk status. 15-pin Sub-D socket.
3 m long system connecting cable with 15-pin Sub-D plug. DIP-
switches for microphone address. Metal plate with charcoal-grey,
non-glare Nextel
®
finish. Dimensions (LxWxH) 170x110x4 mm,
mounting depth between 40 - 60 mm.
Manufacturer:
beyerdynamic GmbH, Germany
Type:
MCS 501
beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 224
[email protected] | www.beyerdynamic.de
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E2/MCS 501 (08.09)
MCS 501
Delegate Microphone Unit
Order # 470.422
1 of 6
