Chapter 5. Wired Connection Setting
IP Converter DK103M Installation User Manual
24
5.3. Accessing the IP Converter Using Internet Explorer
Launch Internet Explorer to access the IP converter web user interface (WUI).
NOTE:
To use the IP converter web interface Internet Explorer 11.0 or later is required.
Enter the following path in the address field:
http://<IP>:<port>/
, where
<IP>
is the IP
address of the IP converter,
<port>
is the number of the port that is used for HTTP connection to
the IP converter (
Pic. 5.19
).
ATTENTION!
By default, the IP address of the IP converter is 192.168.0.99 and the http-port is 80.
NOTE:
You do not need enter a port number if you connect via the default HTTP port 80.
Pic. 5.19
5.4. Accessing the IP Converter via Web Interface
If the path is correct you will see the authorization window (
Pic. 5.20
).
To work with the IP Converter web interface you need to install the ActiveX add-on. You will
see the system notification at the bottom of the window:
“This webpage wants to run the
following add-
on: “AxMediaControl ActiveX Control Module” from “BEWARD Co., Ltd”
(
Pic.
5.20
).