BeWAN AP54 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 40

BeWAN AP54 Скачать руководство пользователя страница 12

BeWAN Wi-Fi AP54

12

Configuring the BeWAN Wi-Fi AP54

If you make any modifications to the Access Point configuration, click each time on

Apply

to

validate the new parameters.

"Primary Setup" tab

The

Primary Setup

tab shows the Access Point’s current parameters (Access Point name, IP

parameters, MAC Address, SSID, channel used, security activation or not).

LAN

Section

MAC Address:

This address is useful, notably when you configure the BeWAN Wi-Fi AP54 in "AP Repeater" or
"Wireless Bridge" mode. You should always enter the LAN MAC address of the remote Access
Point in your settings to allow the connection to be established.

Configuration type:

By default, the

Static

IP Address

option is selected.

The BeWAN Wi-Fi AP54 has the following default IP address: 192.168.1.250.
However, if the existing network already has a DHCP server (DHCP Server activated on a router
for example), you may request the automatic attribution of an IP address for the BeWAN Wi-Fi
AP54 from the server. Select the option

Dynamic IP setting

. Putting the Access Point into the

same address plan as your network allows you to access the administration pages at any time,
without having to modify the IP address of one of your computers.

«
...
10
11
12
13
14
...
»

Содержание AP54









































Отзывы:

Нет отзывов