BEVS Industrial Co., Ltd
5
Website: www.bevsinfo.com Email: [email protected] Tel: +86 20 22197699
3. Place the vessel at the base center and clamp it tightly, lift down the shaft to a suitable height, pour in the
paint and cover the lid.
4. Power on the machine and set the parameter, start running.
3. Precautions
1. When the power supply voltage is lower than 198V, the speed suddenly increases, do not run at this time.
2. Wait at least 10 seconds after power off before turning on the machine, otherwise the phenomenon of sudden
high speed will occur.
3. Since the motor drives the load, the actual speed will be less than the no-load speed. If you find that the actual
speed is seriously inconsistent with the no-load speed (the actual speed is much less than the no-load speed), it
means that the motor is in an overload state at this time, and the inverter will automatically stop working and
the machine stops. At this time, pls shut the mixer down for more than 1 minute, restart to reduce the speed and
load, and then start running.
4. If an emergency occurs, press the "emergency stop switch" button immediately.
