Beurer IPL 8500 страница 8 Скачать руководство пользователя

Страница: 8 / 32

• Do not use the IPL 8500 over piercing or any metal items

such as earrings or jewelry on the area to be treated as

it may cause burns.

• Do not use the IPL 8500 over areas with tattoos or

permanent makeup on the area to be treated.

• Never look directly at the light coming from the IPL 8500

applicator and lamp as it may cause eye injury.

• Never use flammable liquids such as alcohol (including

perfumes, sanitizers, or other applications containing al-

cohol) or acetone to clean the skin one hour before using

IPL 8500 as it may cause burning of the skin.

•

Do not use IPL 8500 on tanned skin or after sun ex-

posure as this can cause serious burns or skin injury.

Avoid more than 15 minutes of sun exposure for 4

weeks before your treatment and for at least 2 weeks

post treatment. If during this period your treated skin

area is exposed to sunlight, make sure to apply SPF

30 or higher sunscreens.

•

Do not treat the same area of skin more than once

per treatment as it may cause skin irritation.

What you must do to avoid other harm –

CAUTIONS

• KEEP OUT OF CHILDREN’S REACH.

• This appliance is not intended for use by persons with

reduced physical, sensory or mental capabilities.

• Do not use this appliance near bathtubs, showers or

other vessels containing water as it may lead to elec-

trocution risk.

• Do not open or repair the device as it may expose you

to dangerous electrical components which may cause

serious bodily damage.

• Do not leave the device unattended while plugged into

the electricity as it may lead to electrocution risk.

• Do not use the device if any part of the device or its ac-

cessories are not working properly, appear damaged,

broken, loose, missing, wet or if you see or smell smoke.

• Before using IPL 8500, make sure the device is clean,

dry and intact. Cleaning instructions are detailed in the

“Cleaning” chapter.

• Do not share device at any time, due to the possibility of

transmitting diseases between users.

•

Use IPL 8500 only with the supplied external

power and accessories. For your safety, never use

DC adapters which are not approved by the manu-

facturer.

• Use the IPL 8500 device only according to the instruc-

tion for use and the intended aesthetic use.

Содержание IPL 8500

































Результаты поиска

Содержание IPL 8500

Отзывы:

Похожие инструкции для IPL 8500

Бренды по названию

Популярные бренды

Beurer IPL 8500, Инструкция по эксплуатации

Результаты поиска

Содержание IPL 8500

Отзывы:

Похожие инструкции для IPL 8500

Бренды по названию

Популярные бренды