Beurer GL30 mg/dL, Инструкция по эксплуатации

Страница: 15 / 32

Beurer GL30 mg/dL 13
4 O
PERATION AND
B
ASIC
S
ETTINGS
4.1 Inserting and replacing batteries
Note
Two batteries are included with your blood glucose monitor. The batteries are
in the bag.
1 Remove the battery cover on the back of the monitor (see "3.2 Blood glucose
monitor" page 8).
2 When you replace batteries, always replace both batteries. The monitor retains
the date and time while the batteries are replaced. Reset the date and time if the
battery replacement takes longer than usual (see "4.2 Making basic settings"
page 13).
3
Insert two new AAA 1.5 V alkaline batteries. Make absolutely sure that you
insert them with the correct polarity as marked. Do not use rechargeable batter-
ies.
4 Replace the battery cover carefully
If the 'change battery' symbol appears, the battery is almost flat. Replace all
batteries as soon as possible. The display shows
E-b if the batteries are so flat that
readings cannot be taken.
4.2 Making basic settings
1 The monitor must be switched off. Remove the battery cover on
the back of the monitor (see "3.2 Blood glucose monitor" page 8).
2 Press the "SET" button.
The year display starts blinking.