Please read these instructions
before use
This stool is designed as a
temporary seating aid only;
do not use as a step
This product is suitable for
use in showers, bathrooms or
wet areas; it is not suitable for
use in a swimming pool
Adjusting the height
The stool is height adjustable to match
individual requirements or uneven surface.
A series of holes along each leg allow seat height to be adjusted
from 475 to 630 mm.
To adjust height, push the height
adjustment button on the leg to release
the locating button and adjust to the
desired height.
Ensure the button is in the correct
position and locked in place when the
final height is set.
Repeat for all four legs, adjusting height
evenly or individually to match an
uneven floor surface.
Before use, ensure the stool is stable and
resting firmly on the floor surface.
Ideal seat height
Ideal height is when the user’s feet rest
flat on the floor, with thighs parallel to
the ground or slightly angled with hips
just above knee level. Knees should
never project above the upper leg.
The Aluminium Shower
Stool with Padded Seat
is manufactured from
lightweight aluminium
for increased resistance
to corrosion with a
waterproof padded seat
for optimum comfort.
Stool comes fully assembled.
Aluminium Shower Stool with Padded Seat
S E T - U P A N D O P E R A T I O N
Regular maintenance
The leg clips should be regularly inspected to ensure they are
fully inserted and firmly attached. Do not use the stool without
all four leg locating buttons inserted, or if the seat is cracked or
deformed.
Regularly check the condition of the rubber tips and replace
immediately if you see evidence of rips, tears, cracks or other
general wear.
Care & cleaning
To clean the seat after each use, wipe with a mild soap and
warm water solution and rinse well. Dry with a clean cloth.
For heavier soiling, wipe clean with a diluted bleach
solution and rinse well before drying. Do not use
water temperatures in excess of 80°c.
It is recommended the frame be cleaned after heavy use or at
least once a week. To clean the frame, wipe clean with a soft
clean cleanser and warm water solution and rinse well.
Avoid harsh, abrasive cleaning agents or utensils
(such as a wire brush) as these can lead to deterioration
of the frame and seat.
