Better Rest SoClean 2, Руководство пользователя

Страница: 7 / 21

7
Getting Started
1. Pre-washing your Equipment
Use two capfuls of the included pre-wash
with a gallon of water to wash your CPAP
equipment (mask, hose, and reservoir), then
rinse thoroughly with clean water.
Note:
The SoClean 2 Go uses no fluids in
its operation. The pre-wash is supplied for
hand washing your CPAP equipment only.
2. Installing the Injection Fitting
With humidifier: Disconnect your CPAP
hose from your CPAP machine. Position the
injection fitting onto the port of your reservoir,
allowing the smaller hose to enter into and
rest on or near the bottom of the reservoir.
If necessary, trim the injection hose if to fit in
the reservoir.
Note: If you keep water in the reservoir, it
is recommended to keep the end of the
injection hose below the water level.