3
PLACING THE SPEAKERS
The speakers can be mounted on to the optional
portable stand, (see figure below). Make sure that the
mounting system (hardware, stand, etc.) is capable of
supporting four times the weight (approximately 25
lbs per speaker) of the speakers.
Please do not stack two-pieces of speakers
onto the adjustable speaker stand.
Circuit Diagram
CONNECTION OF SPEAKER
CABLES
There are two types of speaker input terminals which
should be selected according to application. (see
figures)
1. Use of banana type terminals:
Insert the banana-type terminal cable from the
amplifier into the speaker terminal hole. The plus "
+
"
side is marked red and minus "
-
" side is marked
black.
2. Use of insert-type terminals:
Depress the insert-type terminal cable from the
amplifier into the speaker terminal hole. The plus "
+
"
side is marked red and minus "
-
" side is marked
black.
Before connecting the speaker to connection, you
must make sure that the master volume and the AC
power are off. Otherwise, it may burn your speaker.
Then, double check the connection to match the "
+
"
and "
-
" correctly.
NO WARRANTY AFTER OPENING
No opening on speaker frame
or repairing the components
inside the speaker. We always
recommend you to hire
professional to do the speaker
connection and repair.
Left Speaker
(Stand not included)
Right Speaker
(Stand not included)
1.
Banana Plug Type
2.
Insert Type
USA
AFC 2005-0305 US Right
SAT
ISFACTATIO
N
CON
SUMER
Subwoofer
Driver
Left Speaker
Amplifier
Right
Antena
Left
Antena
Volume
Left Speaker
Engineered by
Better Music Builder
Expert Design Plus Dynamics 2007
NOTE