BOSTON LED FURNITURE
SAFETY
•
This unit is only suitable for connection to a 12V SELV lighting circuit, or a separate
SELV transformer (Not included).
•
Ensure the SELV circuit / Transformer has sufficient capacity to add the unit.
•
The unit should be installed in accordance with local regulations.
•
If installing a new transformer to power the unit, all guidance relating to the
installation of the transformer must be followed.
•
This is for domestic, indoor use only.
•
Ensure the power supply is turned off before attempting to connect the unit to the
circuit.
•
This product may contain delicate parts
–
be careful during handling and
maintenance to avoid breakage.
•
If any modification is made to the
fitting it will invalidate the warranty
and may render the product unsafe.
•
A defective appliance may cause
electric shock. Never switch on a
defective appliance. Unplug the
appliance from the mains or switch
off at the circuit breaker in the fuse
box before seeking assistance.
•
The installer must use an electrical
connector suitable for the
application and environment.
LED INSTALLATION GUIDE
LED STRIP
SENSOR
LED STRIP
COVER
CONTROLLER
WIRE FOR
CONNECTION
PRODUCT DIAGRAM
LED STRIP
