Step 2: Insert the Bottom Section into the Tree Stand
A.
Remove plastic cap at the end of the metal pole.
B.
Locate the notch in the tree stand (use arrow stickers as a guide).
C.
Locate the open groove in the bottom section (the bottom section is marked
with “A”). Use arrow stickers as a guide.
D.
Insert the bottom tree section (bottom section is marked with “A”) into the
stand making sure that the groove slides into the notch. Arrows will be pointing
to each other. The lights will turn on once it drops into the correct placement.
E.
If the lights do not turn on, refer to the Trouble Shooting portion of this
document. Do not drive the section down with force or forcefully turn the
section. Doing so may damage the plugs.
F.
Let the hinged branches fall into place.
G.
Adjust the branch tips for desired appearance (some people chose to perform this
step when the tree is fully assembled).
H.
Tighten screws in stand to secure the tree.
Step 3: Shape the Tree Top and Insert into the Bottom Section
A.
Adjust the tips and shape the treetop before inserting into the bottom section.
B.
Locate the notch, groove, and arrows as described above.
C.
Insert treetop into bottom section (tree top is marked with “B”). Line up the arrows
as described above. The lights will turn on once it drops into the correct placement.
Step 4: Make final adjustments to tree tips and decorate if desired.
Indoor Use Only
Made in China H205670INST042015
2
