background image

 

Indoor Use Only 

 

Made in China  

 

 

H196925INST062012 

 6.5’ Balsam Fir IPT Ready Shape Tree Instructions 

Included Parts: 

 

 

Pre-lighted Tree Top (section A) 

 

Middle Section of Pre-lighted Tree (section B) 

 

Bottom Section of Pre-lighted Tree (section C) 

 

Collapsible Stand with 3 triangular screws attached in a plastic bag. 
 

 

 

Caution – Do not overload: Connect a maximum of three series or series parallel connected lighting strings or 
decorative outfits to each load fitting. Do not interconnect different types of products. DO NOT PLUG ITEMS INTO 
THE OPEN STRAND SOCKETS.  NO OTHER PRODUCTS SHOULD BE PLUGGED INTO THE TREE. 

Setup Instructions: 

Step 1: Position and Set-Up Tree Stand 

 

A.

 

Place tree stand in desired location. 

B.

 

Unfold tree stand until the legs are perpendicular and the screw holes are aligned. 

 

 

 

 

 

 

 

C.

 

Insert the tree screws into the screw holds and turn 3 – 4 rotations only (if the screws are inserted too far you 
will not be able to fully insert the tree pole). 

D.

 

Plug the tree stand into an extension cord or wall outlet. If your tree has a foot pedal: To turn on the power 
to the tree tap the foot switch once. Once you have the bottom section in the lights will come on. To shut off 
the lights tap it again. 
 

 

Содержание 6.5’ Balsam Fir IPT Ready Shape Tree

Страница 1: ... products DO NOT PLUG ITEMS INTO THE OPEN STRAND SOCKETS NO OTHER PRODUCTS SHOULD BE PLUGGED INTO THE TREE Setup Instructions Step 1 Position and Set Up Tree Stand A Place tree stand in desired location B Unfold tree stand until the legs are perpendicular and the screw holes are aligned C Insert the tree screws into the screw holds and turn 3 4 rotations only if the screws are inserted too far you...

Страница 2: ...ent E If the lights do not turn on refer to the Trouble Shooting portion of this document Do not drive the section down with force or forcefully turn the section Doing so may damage the plugs F Let the hinged branches fall into place G Adjust the branch tips for desired appearance some people chose to perform this step when the tree is fully assembled H Tighten screws in stand to secure the tree S...

Страница 3: ...tree tips and decorate if desired Safety First Unplug power supply cord when replacing bulbs and fuses NEVER change fuse with the power supply cord plug in wall duplex Replace with GKI Bethlehem LED mini lights only Avoid touching electric carrying parts with sharp or heavy objects Do not plug other products into the tree plugs Care Instructions Be sure to replace burnt out bulbs with replacement ...

Страница 4: ...ugged in check the fuse at the main power cord part you plug into the wall socket use only 125 volt fuse 5 amp maximum If your item has a foot pedal try tapping the foot pedal once to turn on the lights Tree Storage Step 1 Unplug power cord Step 2 Remove decorations Step 3 Lift each section directly up Step 4 Separate the tree sections starting at the top Fold branches up to avoid crushing the tip...

Отзывы: