BETAFPV Lite brushed V2 FC, Руководство пользователя

Страница: 12 / 16

11
to your flying habit. Please note that PROFILE is used to set the ratio of Setpoint
Weight and Transition.
7.ARM & SWITCH FLIGHT MODE
7. 1 OSD Illustration
There are six parts in OSD info interface: (Use OSD info in the pic as example)
• Arm or disarm: “DISARMING” mean that the drone is disarmed. The OSD info
interface will display “ARMINO” when the drone is armed.
• Receiver mode: “DSMX” refers to the receiver mode you have choosed. If you
choosed the SBUS mode, “SBUS” will show on OSD info interface.
• Voltage: “VOL 4.15” refers to the voltage.
• Flight mode: “ACRO” refers to the flight mode you have choosed. If you choosed
the Levelmode, the OSD info interface will display “LEVEL”.
•Time: “TIME 00:00” refers to the flight time. If the drone fly about 30 seconds, the
OSD info page will display “TIME 00:30”
-OSD info interface-