Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 92 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
MAINTENANCE AND REPAIR
Page | 10-1
10. MAINTENANCE AND REPAIR
10.1 GENERAL MAINTENANCE
Regular maintenance of the mechanical and electrical components prolongs the machine’s
operational life, ensures best performance and is an important safety factor. Regularly verify
the efficacy of the the devices installed on the machine, in accordance with the indictations
given in this instruction manual.
Only authorized personnel are to carry out any maintenance or repairs on the Maxial Track
Hoist.
The operator responsible for maintenance must remember the following:
—
always use individual protection gear (gloves, earmuffs, safety shoes, goggles, etc.)
when carrying out maintenance operations on the machine
—
never start work on the machine before interrupting all electrical power supplies and
ensuring that nobody can reconnect it, even inadvertently
—
never to perform maintenance or repairs on the machine under the Universal Carriage
unless the Universal Carriage is resting on the Bottom Stop to prevent downward travel
—
only original spare parts are to be used whenever maintenance and repairs are carried
out on the machine
—
if the machine is shut down due to faults or maintenance and repairs this must be made
known by means of a warning sign
—
after having carried out maintenance operations proper documentation is recorded for
the maintenance performed
CAUTION
If maintenance is not carried out in accordance with the above mentioned
instructions, or not in conformity with what is stipulpated in this manual, it will be
considered as improper use. BETA MAX disclaims all responsibility if the
operator fails to comply with the requirements.
CAUTION
For repairs to be carried out, it is recommended to always contact authorized
technical support or the Manufacturer of the machine. If maintenance and
repairs are carried out incorrectly, without original spare parts or by personnel
who are not authorized, the user of the machine bears full responsibility for its
proper use.