Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 51 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
INSTALLATION
Page | 5-2
ATTENTION:
Meticulously adhere to the configurations and layouts provided and permitted in
this instruction manual. Layouts and configurations which are different from
those provided are exclusively allowed if specific authorization is given by
BETAMAX's technical office. BETAMAX disclaims all responsibility for non-
compliance or all the more for contributory negligence in respect to the
restrictions given.
DANGER:
Non-conformity with the indications given in the assembly data sheet can
damage the machine and endanger the operators responsible for its use. BETA
MAX disclaims all responsibility deriving from non-compliance with that which is
specified in the assembly data sheet.
The following functions have to be constantly monitored during the assembly operations:
— the exact positioning of the structures and components constituting the machine, in
accordance with the heights and indications shown in the installation design, and
particularly in conformity with the horizontal and vertical measurements or distances
provided in the design itself;
— proper implementation of the machine's anchor devices, in conformity with the
executive layouts and particular instructions provided by the manufacturer;
— functionality and efficiency of the mechanical, electromechanical and electrical safety
devices, specifically intended for assembly, use and disassembly of the machine.
5.2 INSTALLATION DATA SHEET
The data sheet contains the weight of the machine and the heights relative to the installation
of the machine in question.
The data sheet must be completed by the site manager.
The data sheet duly photocopied and signed must be handed over to the operator designated
to carry out the machine's assembly. This document is to be the reference document for the
installation process. See appendix A in this manual.