Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 105 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
MAINTENANCE AND REPAIR
Page | 10-14
Figure 10.4
10.3.7 Slack Rope Assembly
Some kind of inspection and maintenance on the Slack Rope Assembly should be done daily,
refer to the specifc types of maintenance in the maintence checklists located in this manual.
Perform the maintence described below before use:
—
inspect the frame (1) for any breaks or deformities
—
inspect the tensioner bar (2) for any deformities and that the arm moves freely
—
inspect the tensioner roller (3) for any deformities and that the roller moves freely
—
ensure that the tensioner arm springs (4) are intact and able to function properly
—
inspect the limit switch (5) shows no sign of damage
—
inspect that the limit switch plunger moves in and out freely