Beta Max Beta Lite, Процедуры эксплуатации и обслуживания

Страница: 78 / 139

Operation and Setup
B e t a M a x P o r t a b l e H o i s t s O p e r a t i n g a n d M a i n t e n a n c e P r o c e d u r e s M a n u a l
www.betamaxhoist.com
5-22
1-800-233-5112
Installing the Mac-Trac
1. Set one 7-foot brace (A) on top of the scaffold frame coupling pins.
2. Ensure gravity lock pins click in place.
3. Set the other 7-foot brace (A) on top of the scaffold frame coupling pins.
4. Ensure gravity lock pins click in place.
5. Secure both braces to the scaffold with J-hook clamps
6. Braces have three sets of holes for mounting the Monorail/Trac. Choose the
desired location (left, center, or right).
7. Lift up the Mac-Trac Monorail/Trac (B) and align the mounting studs with the
desired set of brace mounting holes.
8. Slip the Mac-Trac Monorail/Trac (B) into the holes.
9. Place the retaining clips (C) through the Monorail/Trac mounting studs.
10. Raise up the Scorpio Plus or Scorpio Plus XL hoist and slide it into the open
end of the Monorail/Trac.
11. Secure the hoist in place with the retaining pins and keepers (D).
12. Remove the cross braces at the load/unload level only.
13. Replace the cross braces with horizontal brace for safety.