Bestway Flowclear 58397, Руководство пользователя

Страница: 6 / 137

S-S-003420
HOSE ADAPTOR FUNCTIONS
7 6
1 9 2 3
1. Assemble the hose adaptors (7).
2. Attach the hose adaptors (7) to the hoses.
3. Screw the hoses with hose adaptors (7) onto the sand filter.
NOTE:
1. Ensure to tighten the hose clamps (9).
2. Always switch off and unplug the sand filter before assembling the hoses, and set the control valve to Closed
position.
3. Ensure the washer (16) is in position before assembling the hoses.
GARDEN HOSE ADAPTOR FUNCTIONS
15 6
1 2 3
1. Assemble the garden hose adaptor(15).
2. Screw the garden hose adaptor(15) onto port D of the sand filter.
3. Attach garden hose to the garden hose adaptor(15).
NOTE:
1. Garden hose adaptor(15) can be used for draining only, and can only be assembled to port D of the sand filter.
2. Always switch off and unplug the sand filter before assembling the garden hose adaptor(15), and set the
control valve to Closed position.
3. Ensure the washer is in position before assembling the garden hose adaptor(15).
Section I: Assembly
(You will need a Phillips screwdriver).
1. Carefully remove all components from the package and check to ensure nothing is
damaged. If equipment is damaged,immediately notify the retailer from where the
equipment was purchased.
2. The sand filter should be placed on solid, level ground, preferably a concrete slab.
Position the sand filter so the Ports and Control Valve are accessible for operation,
servicing and winterizing.
285mm
Ø8mm
3. EN60335-2-41 TEST standard requires the sand filter to be vertically fixed on ground or a certain pedestal
made of wood or concrete before use to prevent the sand filter from accideutally falling. Fully assembled
sand filter will exceed 18kg. The mounting holes should be 8mm in diameter and spaced 285mm apart. Use
two bolts and nuts with a maximum of 8mm in diameter to fasten the sand filter to the pedestal.
Load pool-grade filter sand.
NOTE:
Use only special pool-grade filter sand, free of all limestone or clay: #20 Silica sand 0.45-0.85mm,
approximately one 8.5kg bag should suffice. If you do not use the recommended size filter sand, filtering
performance will be reduced and the sand filter may damaged, thereby voiding warranty.
NOTE:
To avoid damaging the Skimmer when adding sand, pour some water into the Bottom Tank to submerse
the Skimmer on the Collector Hub.
NOTE: SAND NOT INCLUDED.
6