WARNING:
1. Keep away from heat sources and fires.
2. Avoid the sharp and rough objects, or the airbed may get damaged.
3. Do not over-inflated or jump on the airbed, doing so may decrease the airbed’s life span.
4. The airbed is not a life saving device, do not use in water.
5. Exclusively designed for air beds
NOTICE:
Read the instructions completely and save these instructions.Retain this booklet for future reference.
CAUTION:
There are risks when you use the article in the open and/or watercraft.
6. The airbed is not a toy, children should be supervised to ensure that they do not play with airbed/valve.
#67223/#67225
BUILT-IN FOOT PUMP AIRBED
INSTRUCTION
PREPARATION:
1. If the airbed is dirty, use a clean damp cloth and gently wipe down the surface. Be sure to dry the airbed before storing.Check the
product for damage at the beginning of each season and at regular intervals when in use.
Note: Do not use harsh detergents that may damage the airbed.
2. Once deflated, carefully fold the airbed and store in a cool, dry location away from chemicals and heavy, or sharp objects.
CLEANING & STORAGE:
If the airbed surface is damaged, use the provided repair patch.
To repair: 1. Completely deflate the airbed.
2. Clean and dry the damaged area.
3. Apply a repair patch and smooth out any air bubbles.
Note: Never use other liquid glue or adhesive fabric, only use the repair patch like the provided one.
REPAIRING:
Please read instructions carefully before using this airbed.
Bestway has two ways for you to inflate the airbed.
Unroll the bed onto a flat area free from objects and debris.
The Flocked side should be facing up and the PVC side should be on the ground.
1
S-S-006133
S-S-006133/14x21cm/#67223/#67225/GS
内置脚踏泵植绒床垫说明书
/JS-YF-2016-B-17920/
英
NOTE:
INFLATION:
DEFLATION:
Locate the foot pump and remove the white rubber plug from the suction port. Depress the foot pump area to inflate the bed. Be sure
to depress the pump straight down. Your foot should completely cover the suction port while depressing the foot pump, this will keep
the air from escaping the inflation chamber back through the suction port. Lift your foot completely off of the hole in order to have the
suction port refill the chamber. Continue until the bed reaches to proper firmness and most of wrinkles are gone. Insert the white
rubber plug back into the suction port and screw on the plastic cover. The airbed is ready for use. (FIG 1)
Open the valve to deflate.( FIG 3)
Air pump
Open the valve; inflate the bed with an air pump and close the valve once inflated. (FIG 2)
Note: Air pump is not included.
After use, airbed may require additional air to increase firmness, add air according to your desired firmness.
Built-in Foot Pump
FIG 1
FIG 2
FIG 3
Item No.
Max load
#67223
#67225
300kg/661lbs
150kg/330lbs
