BestPartner Parabola XP antennas installation maunal.
Applies to Parabola XP 2.4 GHz and 5.x GHz antennas.
Procedure:
1. Attach the antenna to the pole using included
handle.
2. Attach 2 u-bolts by inserting them through
saddle clamps and securing with nuts and lock
washers.
3. Place antenna over pole, align horizontal
direction by rotating on pole and tighten the u-bolt
nuts.
4. Set up vertical align using included handle with
graduation. Tighten the nuts in desired handle
position.
5. Attach a low loss signal cable to the integrated
N(F) connector. Seal the connector joint with
waterproof sealing tape or sealing compoud.
Note 1:
The mounting handle is suitable fore pole diameters
from ½ to 1 ¾ inches. Mountning poles and their
supports should be designed to withstand the wind
loads as required by the local building code.
Note 2:
To set the bending of the antenna, use the α and β
graduation. See the table and pictures below.
Tab.1: Central beam range (in meteres):
Antenna
Altitude /
Lean
1°
2°
3°
4°
5°
6°
7°
8°
9°
10°
11°
12°
13°
14°
15°
20 m
1146
573
382
286
229 190 163 142 126 113 103
94
87
80
75
50 m
2864 1432
954
715
572 476 407 356 316 284 257 235 217 201 187
75 m
4297 2148 1431 1073
857 714 611 534 474 425 386 353 325 301 280
100 m
5729 2864 1908 1430 1143 951 814 712 631 567 514 470 433 401 373
