Buttons & Phone Keypad
Before making phone call, you must configure and connect ATA 10D properly.
Please enter your Internet information with your touch-tone telephone keypad and BESTip’s buttons.
Refer to the Typical Phone Keypad and Configuration Sheet below to enter characters.
ABC
2
DEF
3
1
JKL
5
MNO
6
GHI
4
TUV
8
WXYZ
9
PQRS
7
0
#
*
Typical Phone Keypad and Character Set
BESTip ATA 10D Quick Start Manual (Ver.1.47A)
Requirements:
Before making any Internet call from your BESTip ATA 10D, you need the following items:
1.
An Touch-tone phone set.
2.
An 110/220V AC electrical outlet.
3.
An dial-up Internet account – ISP phone number, user login ID and password.
4.
An analog phone line
Connection:
Please refer to the diagram below for the typical connection.
How to enter or change setting
Use the buttons in the front panel for menu function navigation. Go to the option you want to
setup. Then follow steps described below to enter or change the setting,
1.
Press one time, the title will start flashing. You may enter new setting from phone keypad
now.
2.
Press button again. The title will stop flashing. The new value has been stored in memory
temporarily. You may go to the next setting.
3.
After all the settings has been setup, please press
one or two times until the screen
displays “Update Setup”. All the setting will be saved permanently.
Note: It is a good practice to restart the device if any setting had been changed.
All Rights Reserved Copyright © 2009 Projectek Networking Electronics Corp.
