BESTEK MEB-7600, Руководство пользователя

Страница: 42 / 42

42
Q: My Windows does not shuts down. It reboots in a few seconds after power off.
A: Please check the following before you call out for help:
(1) Press and hold the power switch for 4 seconds to see if your system shuts down permanently.
(2) Clear CMOS and try again.
Q: The display resolution is not right
A: Please change the resolution as follows (for Windows)
(1) Window-XP: Right-Click on the desktop and select Property for the configuration panel.
(2) Windows-7: Right-Click on the desktop and select Resolution for the configuration panel.
Q: I cannot connect my network with internet
A: Please consult your system administrator to confirm if a static network environment with security port
designation has been deployed. Otherwise, mostly, reassuring to have Windows acquiring IP address
automatically would be suggested and should resolve the situation. Please be referred to your system
administrator for any further network configuration setting.
Q: My Windows does not see more than 4GB RAM
A: A 32-bit operating system captures only 4GB memory.
Q: 4GB RAM is installed, but Windows only sees around 3.0GB capacity.
A: Some portion of the system memory will be allocated for system devices, especially the onboard video device.
Q: Some onboard devices are not detected in Windows
A: Please check the following before you call out for help:
(1) Please go to Device Manager to rescan these devices if necessary.
(2) If any of the LAN port is not detected (4 of them should be all detected), please go to BIOS setup menu,
Advanced/PCIE Ports Configuration, to see if any of them has been disabled.
Q: RS-232 Ports do not work
A: Please check the following before you call out for help:
(1) Please go to Device Manager to see if COM1/COM2 are correctly prompted.
(2) Please go to BIOS setup menu, Advanced/Super IO Configuration, to make sure RS-232 port(s) has(have) been
enabled.
(3) Please double check your RS-232 cable for correct pin definition.