background image

20

Important information to read before starting the assembly.
Keep this information for future reference.

WALL ANCHORING 

REQUIREMENTS

& INSTALLATION RECOMMENDATIONS

IMPACT OR CRUSHING HAZARD: If bed is not 
properly attached to the wall, it can suddenly fall, 
resulting in serious injury or death.

•  NEVER use hollow-wall or drywall anchors.

•  NEVER attach wall bed directly to drywall, sheetrock, 
  gypsum, or other wall board.

•  ALWAYS attach wall bed to base of wall and floor.

•  ALWAYS use twelve (12) screws for floor and 
 wall 

attachment.

WARNING

IMPACT OR CRUSHING HAZARD: If bed is not properly attached to the wall and floor, 
it can suddenly fall, resulting in serious injury or death.

•  For wood or masonry wall structure, a qualified person must install the bed to the wall.
•  For all other types, a construction professional must install the bed to the wall in compliance 
  with the codes and regulations in the province, state, or country where installed.
•  The choice of wall attachment screw depends on wall type. Use wall attachment screws 
  suitable for your wall material.
•  Verify structural integrity of floor and wall prior to installation.
•  Do not open or use the bed if the bed cabinet moves while opening, or if you notice any other 
  signs of loose or detaching screws.
•  Never remove wall and floor attachment screws without first disassembling and removing 
  the mattress frame and lift cylinders.
•  Qualified person must have the skills and tools necessary to locate wall studs, identify type 
  of wall structure (wood, metal, masonry or other) and install screws correctly to wall structure. 
  Skills and tools include electronic stud finder, drill motor and bits, screwdriver, and ability 
  to correctly use these tools.

WARNING

85183-3  AN

35

SERVICE: 1-888 8BESTAR (1-888 823-7827)

Содержание Murphy 85183-3





























































Отзывы: