Best Fitness BFCCO10, Руководство пользователя

Страница: 16 / 22

16
s t e P
4
Be careful to assemble all components
in the sequence they are presented.
nOte:
Finger tighten all hardware first. wrench tighten at the end of step 4B.
some components may be pre-assembled. nylon lock nuts will not fully
screw onto bolts, they must be wrench tighten to fully go on.
4a. attach Crossbeams (J & K) to uprights (a) using:
8 - (#1) M12x80mm Hex Head Bolt
16 - (#6) M12 Flat washer
8 - (#9) M12 nylon lock nut
4 - (H) support Bracket
4B. attach Pulley Brackets (e) to Crossbeams (J & K) using:
4 - (#6) M12 Flat washer
2 - (#9) M12 nylon lock nut
4 - (#13) Metal Bushing