Shortening your tape light
• Use a pair of scissors to cut on a cut line. Cut lines are
about 1.3 in. (3.3 cm) apart.
Warning
: Do not cut the silver solder markings. Only cut in
the center of the copper-colored pads, as shown.
Attaching your lights
1
Peel the adhesive backing off the lights, then adhere
the lights where you want them.
2
Optional:
Attach the double-sided tape to the back of
the light control, then adhere it where you want it.
Notes:
• Make sure that the tape light is unrolled, otherwise it
can damage the tape light or cause a fire.
• Every surface is different, and additional adhesive may
be used if the LED tape detaches from the surface.
Small pieces of clear tape can be used.
Connecting to power
• Place the tape light where you want it, then connect
the USB connector to your TV, computer, or other USB
power source.
Features
• Produces custom lighting with 20 color options
• Attaches to TVs, cabinets, and other objects
• Adjust the brightness level with a multi-step dimmer
• Cuts to whatever length is needed
• Reduces eye strain from TVs and monitors
• Powered by USB
• Built and backed by Best Buy
Using your tape light
USB
connector
Wire
LED
light strip
Cut
line
Change color
Turn on/off
Adjust brightness
Light controls
Cut line
Before using your new product, please read these instructions to prevent any damage.
Package contents
• LED tape light
• Double-sided tape
•
Quick Setup Guide
4 ft. Full-Color
LED Tape Light
Quick Setup Guide
BE-LED4RGB19
WARNING: Unroll before use. Never plug in the LED lights when rolled up, as this can
result in product damage or a fire.
BE-LED4RGB19_-C_20-0896_QSG_V1_EN_Final.ai 1 2/8/2021 2:51:03 PM
