Bes Ingenium IPR-K BD930000, Руководство по программированию

Страница: 6 / 17

BD930000
- IPR-K
Programming manual
v1.0
www.besknx.com
6
4 Devices programming with IPR-K
In order to download the configuration to KNX devices from the ETS through the BES IPR-K device, a physical address must
be assigned to the device (although it is not necessary in case of use as an IP-TP interface, it is essential if it is used as a
coupler, and it must also have a valid IP address through which it will communicate with the computer so that both must be
on the same network. If the device has the DHCP option activated, the IP will be assigned by the router automatically.
Multiple application program downloads (not physical address assignments) can be made simultaneously on different lines
through IPR-K devices. To do this, on each line you must select the IP router in charge of programming within the properties
of the line. Each line will have an assigned IPR-K that cannot be shared between them.