Berthoud PULVASOL 200, Руководство пользователя

Страница: 24 / 36

24
82.321-M - Pulvasol 1 and 2 / Pulvigne
- Rinse the circuit completely (with a cleaning product).
- Drain the tank.
- Rinse with clear water.
- Protect against the frost, using sufficient antifreeze into the tank (glycol or coolant).
- Start the pump slowly.
- Operate all the valves so as to protect the pump, control valve, filters and pipes.
- Start spraying so as to supply antifreeze onto the boom. When the antifreeze has reached the nozzles, stop
the spraying and disconnect the power take-off.
PRECAUTIONS TO BE TAKEN AGAINST FROST
NOZZLES OR FILTERS DIRTY
CLEANING THE FILTER
HANDWASH TANK
- Clean and rinse dirty filters or nozzles using a brush and water.
To do this, use the brush/wrench (BERTHOUD reference 779.354).
Never blow into a nozzle .
See figure 9.
For the 200 / 300 / 400 / 600 L:
- Unscrew the nut (E) to reach the filter cartridge to clean it or change it.
For the 800 L:
- The vannofilter is equipped with a closing valve.
- The filter (mesh 6/10º) can be cleaned even when the tank is full.
- To remove the filter, put the spindle in position (1) (closed, the tank is isolated).
- Undo the star knob (3). The filter is accessible.
See figure 10.
For hygiene and convenience:
A 15 or 18 litres water tank independent of the rinse tank, can be fitted; this allows washing hands and all body
parts (face, eyes,…) than can be contamined by chemical splashes.
Positioned in front of the sprayer, its tap (2) is within easy reach.
IT IS ESSENTIAL to fill the handwash tank with clear water
through the lid or the cap (1), without any pressure.