Berthoud PULVASOL 200, Руководство пользователя

Страница: 22 / 36

22
82.321-M - Pulvasol 1 and 2 / Pulvigne
By cleaning your sprayer regularly during and at the end of treatment seasons:
- you will avoid spraying chemical residues on the crops,
- you will ensure a good distribution of the product, while eliminating total or partial blockage of the nozzles,
- you will increase your sprayer's life.
- Filter:
Make sure that the suction filter is clean and in good condition.
- Pipes:
Look for any leaks. Check for kinks in the pipes.
- Seals and fittings:
Check that the nuts on the fittings are tight, change the seals if necessary.
- Pump:
Check the oil level.
- Nozzles:
Change them once a year or when their flow rate is 10 to 15% greater than their initial flow rate. (To do this,
use the FLOW TEST, BERTHOUD reference 765.241 - or the FLOW RATE GAUGE, BERTHOUD reference
778.887).
- Tank:
Check that there is no foreign matter in the tank.
Carry out the sprayer's maintenance operations with the engine switched
off, the ignition off and the power take-off disconnected.
PRACTICAL RECOMMENDATIONS
FOR THE SERVICING OF YOUR SPRAYER
CHECKS BEFORE SPRAY SEASON