Berthold Crocodile miniWorkstation, Руководство по эксплуатации

Страница: 23 / 68

LB 925 Crocodile miniWorkstation 3. Installation
84024BA2 Rev. 03, 04/2020 Page 23 of 68
3. Installation
3.1 Unpacking and Check of Shipment
The Crocodile miniWorkstation and the acrylic cover are shipped in a
cardboard box containing foamed inserts to protect the instrument
and the cover from damage. Also included is an accessory box.
1.
Carefully unpack the instrument and the accessories.
2.
The instrument is heavy and slightly awkward to lift. Use
extreme care when unpacking and carrying the device.
3.
Ensure that the shipment is complete and shows no sign of
transportation damage.
4.
Read the Accessories Check pasted on the cardboard box to
check that all accessories are included.
5.
The cardboard box and the foamed inserts should be stored
for future shipment or service. See chapter 10 for details.
NOTICE
Should the instrument or instrument parts be damaged in any way,
please inform the shipping agent or the manufacturer immediately.
3.2 Setup and Installation of Hardware
The Crocodile miniWorkstation must be set up carefully on a level
workspace in a dry, fairly dust-free room and protected from direct
sunlight and significant temperature fluctuations. Due to its
dimensions the instrument is space effective.
The system must be set up a distance from the wall or other devices
to allow disconnecting the power supply from mains at any time. Do
not set up next to a radiator or near air conditioning.
1.
Remove the transport lock screw that fixes the microplate
holder on the surface of the Crocodile.
2.
Store the transportation lock screw for subsequent use. The
transportation lock screw should be installed again any time
the instrument is in transport to another location.