BERTHOLD TECHNOLOGIES LB4710-050, Руководство пользователя, Страница: 198 / 227

Chapter 4 Getting Started
Mini-Switch LB 471
53
4.3
Basic Setting for Standard Mode
For basic setting you have to set or check at least the sic grey
shaded parameters in the code table:
Code
no.
Designation Value range Factory
setting
Page
00 Password 0000 - 9999 21
01 Year 1970 - 2099 Current year 21
02 Month / Day 01.01 - 12.31 Current date 21
04 Operation mode
Standard/Professional 0 - 1 0 22
05 Detector code 0 - 99 0 or 99 22
06 Nuclide 0 - 1 0 22
10 Reading in % averaged -999 - 9999 Reading 25
11 Reading in cps
averaged 0 - 999.9 Reading 25
16 Max. or min. limit
value switch 0 – 1 0 27
20 Empty count rate 0 - 999.9 Reading 36
21 Full count rate 0 - 999.9 Reading
22 Zero count rate 0 - 9.999 Reading 32
32 Zero count rate 0 - 9.999 Depending on
detector code
32
39 Half-value layers 1-9 2 37
50 Limit switch software 1.00 - 9.99 Version 41
51 Detector software
(only FSK detector) 1.00 - 9.99 Reading 43
52 Detector temperature °C
(only FSK detector) -40 – 80 Reading 41
53 Detector high voltage
(only FSK detector) 500 - 1300 -1 43
54 Detector HV-default
(only FSK detector) 500 - 1300 Set in factory 44
The parameter setting requires that you are already familiar with
the basics of operation (see page 9).
To read in the zero count rate correctly, the source should not yet
be mounted when working with the Super-Sens (see page 32).
The following parameters have to be checked or set. See chapter
3.4 for a detailed description of the parameters.
Note!
The illustrations contain example values which you have to substi-
tute by actual or suitable values.
Table 7
Basic setting for
standard mode