BERTHOLD TECHNOLOGIES LB 480, Руководство пользователя

Страница: 360 / 450

54733-10BA2L
3 – 360
02.2017
Menu Structure Volume 3
2.32
Temp. Threshold Settings
Menu path: Device Config

Setup

I/O Setup

Digital
Output

Temp. Threshold Settings .
1 Temp. Upper Limit
Upper limit value for the detector temperature.
An alarm may be signaled via the digital output if this temperature
is exceeded. To do this, set the digital output to the function
DET.
TEMP . The alarm is also signaled when the minimum detector tem-
perature ( Temp. Lower Limit ) is not reached.
Tip
You can use this feature, for example, as a pre-alarm, for the
detection of an over-temperature, or control the cooling water
cycle of the detector so that the cooling water flow is started at ele-
vated temperature.
2 Temp. Lower Limit
Lower limit value for the detector temperature.
An alarm may be signaled via the digital output if this temperature
is not reached. To do this, set the digital output to the function
DET.
TEMP . The alarm is also signaled when the maximum detector tem-
perature ( Temp. Lower Limit ) is exceeded.
Tip
You can use this function as a pre-alarm for under-temperature, so
that a possibly connected cooling water system does not freeze, or
a heater is turned on.
3 Temp. Hysteresis
Hysteresis for the temperature limit values.
4 Temp. Unit
Unit for the detector temperature. The temperature can be indi-
cated in Fahrenheit or in Celsius.
5 Device Temp.
Displays the temperature inside the detector.