Figure 5
www.berninifountains.com
Assembling The Bird Feeder
Paolo Bird Feeder Instructions
June 2021 © Yeiser Research & Development LLC and Bernini
®
Fountains. Trade names, product names and logos used
in this document are the trademarks or registered trademarks of Yeiser Research & Development LLC, Santee, CA 92071
Figure 2
Figure 1
Assembled
Bird Feeder
Figure 3
Coarse
Fine
Figure 4
Figure 4a
Figure 4b
Figure 4b
Figure 4a
Step 1: Each Post has a matching length Post. Arrange the matching pairs of Posts in descending order (Figure 1).
Step 2: Starting with the tallest Post, screw the male coarse thread end into the Base (Figure 2).
Step 3: Take the matching Post and screw it onto the top of the Post you just screwed into the Base (Figure 3).
Step 4: Set the Bird Feeder Bowls (Figure 4a) onto the top of the assembled Post & secure with supplied wing nuts (Figure 4b).
Step 5: Repeat steps 2 - 4 for reaming Post and Bird Feeder Bowls in descending order (Figure 5).