www.berninifountains.com
O W N E R S M A N U A L
50” Mighty Power Shovel
TM
*PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING TO ASSEMBLE/OPERATE YOUR NEW MIGHTY POWER SHOVEL
TM
Step 1: (Figure 1 Arrow) When shovel is
facing down, push down on lock collar,
while pushing down on lock collar,
extend your shovel to desired length,
release lock collar and shovel will auto
lock into place.
Step 2: (Figure 2 Arrow) Choose one of
the two notches, once desired length is
selected move to step 3 (see Figure 5 A &
B).
Step 3: (Figure 3 Arrow) Release lock
collar and shovel will auto lock into place.
Pro Tip: If the shovel is not locking into
place rotate the handle of your shovel
until the lock collar locks into place.
To extend your Bernini® Mighty Power Shovel
TM
, locate the Lock Collar. There are two positions on the lock collar, Lock and Unlock,
identified by the lock icon and unlock icon. On the Shovel Neck there are two indented groves to select a chosen length.
2. Extending your Mighty Power Shovel
TM
Figure 3
UNLOCK
LOCK
Figure 2
UNLOCK
LOCK
Figure 1
UNLOCK
LOCK
1. Assembling The Mighty Power Shovel
TM
1. Remove the Shovel Head and Handle from the box, place the spring washer onto the handle threads and thread the end of the
handle into the Shovel Head making sure to tighten the tube until secure (Step 1).
NOTE: If desired you can leave your Mighty Power Shovel
TM
assembled or you can disassemble your Mighty Power Shovel
TM
and
store in the Mighty Power Shovel
TM
Storage Bag.
But if you disassemble your Mighty Power Shovel
TM
please store the Spring
Washer in a safe location (the original storage bag is a great place)
Storage
Bag
Handle
Contents:
Spring Washer
Shovel Head
Handle
Step 1:
Please Note: During assembly
ensure that spring washer
is inserted on the threads
between the Shovel Head
and Shaft.
