Hold In Multiple Positions
Adjust To Your Comfort
Multiple Pattern Spray Nozzle
Great For All Your Watering Needs!
INSTRUCTIONS
1. Remove the EZ Grip Nozzle
TM
from the package.
2. Ensure the multi-pattern spray nozzle (included) is tightened securely to the outlet
of the EZ Grip Nozzle™
3. Attach the other end of your EZ Grip Nozzle™ (the inlet) to an outlet of a water hose.
4. Turn on the faucet attached to the hose to start using your EZ Grip Nozzle™.
* Please Note: Your EZ Grip Nozzle™ may come with an extra rubber washer.
There should only be one washer per connection.
Two washers doubled up in the spray nozzle or in the inlet can cause leakage.
Faucet
Assemble EZ Grip Nozzle™ to Hose
Parts
Multi-Pattern
Spray Nozzle
EZ Grip
Nozzle™
Adjustable
Large Grip
Adjustable/Rotating
Comfort Handle
Large On-Off
Valve
EZ
GRIP
NOZZLE
Using The EZ Grip Nozzle™
A
B
EZ
GRIP
NOZZLE
TM
Locking
Button
C
D
E
F
Screw hose outlet
to EZ Grip Nozzle™ inlet.
1 Rubber Washer
Make sure the Multi-
Pattern Spray
Nozzle is tight
and secured.
1 Rubber Washer
A
. With the handle in the lateral position insert
fingers through the handle and grasp the
arc of the handle. The EZ Grip Nozzle™
will hang below the hand.
B
. With the handle in the lateral position insert
fingers through the handle and grasp the
body of the nozzle between the On/Off Valve
and the inlet. This grip is larger than the
handle grip.
C
. To turn the handle 90 degrees press the
locking button, located in the center of the
base of the handle, to release it. Turn the
handle and it will snap into position. Repeat
this step to turn it back to the lateral position.
D
. With the handle in the perpendicular position
insert fingers through the handle and grasp
the arc of the handle. The EZ Grip Nozzle™
will hang below the hand.
E
. With the handle in the perpendicular position,
and the On/Off Valve facing up, insert palm
(face down) through the handle and grasp
the arc of the handle. The EZ Grip Nozzle™
will rest above the hand.
F
. With the On/Off Valve facing up turn clock-
wise (one quarter turn) to turn On. Turn one
quarter turn counter clockwise to turn Off
water flow.
