manualshive.com logo in svg

Bernina 740 Favorite, Руководство пользователя

Поделиться
Скачать
Bernina 740 Favorite Скачать руководство пользователя страница 116

BERNINA Stitch Regulator (BSR)

114

Prerequisite:

•

The Slide-on Freearm Extension Table has been fitted.

•

The knee lifter of the Free Hand System is attached.

> Lower the feed dog.
> Select the desired BSR Mode.
> To lower the presser foot, push the button «Start/Stop» or press the foot control.
> To start the BSR Mode, push the button «Start/Stop» again or press and hold the foot control again.

– A red light is lit on the BSR Presser Foot.

> Move the fabric to control the speed of the machine in the BSR Mode.
> To stop the BSR Mode, push the button «Start/Stop» again or release the foot control.

– The BSR Mode stops and the red light at the presser foot goes off.

BSR

> To deactivate the BSR Mode and to quilt without automatic stitch lengths, tap «BSR Mode».

1

11.7 Securing

Securing in BSR1 Mode with the button «Start/Stop»

Prerequisite:

•

The BSR Presser Foot is fitted and connected to the machine.

•

The BSR display opens and a BSR1 Mode is active.

> Lower the feed dog.
> Lower the presser foot.
> Push the button «Needle Up/Down» 2x.

– The bobbin thread is brought up.

> Hold the upper and the bobbin thread.
> Push the button «Start/Stop».

– Start the BSR Mode.

> Sew 5 – 6 securing stitches.
> Push the button «Start/Stop».

– The BSR Mode stops.

> Cut the thread.

Содержание 740 Favorite











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды