Berner BGI40, Руководство по эксплуатации

Страница: 7 / 34

side 6 from 34 08.11.2014
Ver. 2.9 © Berner cooking systems 2014
Monitoring of the heating zone
The heating zone is monitored by a temperature sensor located underthe frying surface. The
energy supply is stopped when the selected temperature is reached. At a higher temperature,
thedevice does not transfer energy back intothe frying surface until the temperature has fallen
below the selected value.
Noise
The fans of the cooling are audible, but switch off again in between.
General
This manual contains basic information that must be observed during assembly, application
and maintenance. It must be read completely by the installer and the operator before
installation and commissioning, and must always be located near the cooking station for a look-
up.
application
The inductiongeräte are used for preparing meals. They can be used for frying,keeping warm,
grilling etc. of food.
Product
products
-
Compact modular design
-
Easy operation via rotary knob and digital 4-digit display
-
Compact power electronics enable easy and safe operation
-
Max operational safety thanks to various protection and monitoring functions
-
Continuous temperature with electronic overtemperature protection of the power part.
specifications
Operation and control
Lamp "Operation" 2V DC/approx. 10mA (LED Green)
Power Controller - Potentiometer0Ohm - 10kOhm
Digital display "Power and error display" 2.8V DC/approx. 60mA (red)
Lamp "Operation" green (devices with main switch)
Technical device data
ModelHeating zone(s)external dimensions
in B x T x H
Externalframe
in W x T x
H
BGI401400 x 600 x 120 mm400 x 600 x 20 mm
BGI602600 x 600 x 120 mm600 x 600 x 20 mm
BGI802800 x 600 x 120 mm800 x 600 x 20 mm
Devices Coil VoltageType Generator
Power
Weight
BGI40 300x460 mm400V/3"/N/PE BIPS5400V/3"/PE 5.0 kW30.40 kg
BGI60 260x460 mm400V/3/N/PE BIPDS400V/3/PE 10.0 kW-- kg
BGI80 350x460 mm400V/3/N/PE BIPDS400V/3/PE 10.0 kW -- kg
Functional conditions
o
max. tolerance of mains voltage nominal 5%/-10%
o
Frequency50 / 60 Hz
o
Protection class in delivery state with module IP 21
o
Protection class in delivery state with separate generator (GSG1/2) IP 11