Berner BGI40, Руководство по эксплуатации

Страница: 6 / 34

side 5 from 34 08.11.2014
Ver. 2.9 © Berner cooking systems 2014
-
attention! Do not place hot pots or pans on the heating zone(s) on the control panel,
indicators or hob frame. Ignoring this notice will damage the pots and equipment. Effect in
ignoring: Pots are welded together, burning the joint material by heat of the pots and thus
destroying the seal, leading to penetration of moisture and grease and can thus lead to the
defect of the device. Defect of the displays or control panels.
-
If the frying plate is torn or broken, the inductiongerät mustbe switched off and disconnected
from the electrical supply. Do not touch any parts inside the induction.
-
The heating zone(n) is heated by induction. To avoid injuries (burns), do not touch the
heating zone(s).
-
Please be wareify against hot food and liquids.
-
PLEASE NOTE: Warning of possibly slippery ground in the vicinity of the device. This can
lead to injuries.
-
Turn off the heating zone if you don't needit. This prevents the heating process from
automatically. Thus, unattended heating is avoided, i.e. a person whowants to use the
inductiongerät must start the heating process by switching on the device or by turning the
power controller to 'ON'.
-
Do not use the heating zone(s) as a shelf!
-
Do not place paper, cardboard, fabric, etc. on the heating zone(s)as it mayignite. Aluminium
foils and plastic vessels must not be placed on the hot surfaces.
-
Care must be taken to ensure that during the operation of the device, items worn by the
user, such as.B rings, watches, etc., can become hot when they come close to the frying
surface.
-
After use, the device must be switched off by means of its control and/or control device.
Device does not switch offautomatically.
-
Do not place credit cards, phone cards, cassettes or othermagnet-sensitive items on the
heating zone(s).
-
The inductiongerät has an internal air cooling system. Avoid obstructing the air supply and
air outlet zone with objects (e.B. fabric). This would cause overheating and therefore the
device's shutdown.
-
Avoid the entry of liquids into the device and overflow water or cooking material over the
edge of the frying area. Do not clean the device with a water jet.
Improper operation
The functionality of the inductiongerätit can only be guaranteed if used correctly. The limit
values in accordance with the technical data may not be exceeded or exceeded under any
circumstances.
Changes / use of spare parts
Contact the manufacturer if you intend to make changes to the device. To ensure safety, use
only original spare parts and accessories approved by the manufacturer. When using non-
original components, all liability for follow-up costs expires. When disassembly, testing or
repairs, pay attention to the stability of the device.
Attention! When replacing spare parts, the induction device must be "visibly tt" from the
power supply.