Berner BGI40, Руководство по эксплуатации

Страница: 11 / 34

side 10 from 34 08.11.2014
Ver. 2.9 © Berner cooking systems 2014
Devices on and off switch
Position OFF:Position ON:
'0' points to the mark ()'I' points to the mark (). οο
Power knob
(Depending on the model and option, various gags are used)
The number showing for marking marks the current position of the power knob.
Position OFF:
'0' points to the marking ()
Position A:P osition ON with standby:
Each position, which is used for the marking ()
displays. MIN (minimum) to MAX (maximum)
device. Before performing the functional test, the user must know how to operate the induction
devices.
Standby function (optional)
How to use the standby function
Rotate the gag to the green mark. When using this function by means of gags ( ) they activate
a predetermined value of 100°C. This feature helps to save energy. However, this also reduces
the heating times.
Control with potentiometer and 4-digitr display
With the gag, the temperature can be selected from 70-250°C. The display is as follows:
SHOULD temperature 70°C (point), actual temperature too low,
Heats: Point to the right of symbol
IS temperature 25°C (every 10 sec.), actual temperature too low,
Heats: point to the right of symbol
SHOULD temperature 70°C (point), actual temperature /-
2°C, Does not
heat
IS temperature 105°C, actual temperature too high, does not
heat
H