Bernecker + Rainer 5PC820.SX01-00, Руководство пользователя, Страница: 94 / 318

94
Commissioning • Connection examples
Automation PC 820 User's Manual V 1.20
3.3 One Automation Panel 900 via SDL
One Automation Panel 900 is connected to the integrated SDL interface via an SDL cable. USB
devices can only be connected directly to the Automation Panel (without a hub).
3.3.1 Basic system requirements
The following table displays the possible combinations for the APC820 system unit with CPU
board to implement the configuration shown in the figure above. If the maximum resolution is
limited when making the combination then it is also shown in the following table (e.g. for
connecting a non-B&R Automation Panel 900 device).
3.3.2 Link modules
Figure 32: Configuration - One Automation Panel 900 via SDL
CPU board with system unit Restriction
Resolution
5PC820.SX01-00 5PC820.SX01-01
5PC800.B945-00 / -10
✓ ✓
Max. UXGA
5PC800.B945-01 / -11
✓ ✓
Max. UXGA
5PC800.B945-02 / -12
✓ ✓
Max. UXGA
5PC800.B945-03 / -13
✓ ✓
Max. UXGA
5PC800.B945-04 / -14
✓ ✓
Max. UXGA
Table 63: Possible combinations of system unit and CPU board
Model number Description Note
5DLSDL.1000-00 Automation Panel Link SDL receiver
Connection for SDL in, transfer of display data, touch screen, USB 1.1, matrix keys, and service
data, 24 VDC (screw clamp 0TB103.9 or cage clamp 0TB103.91 sold separately).
For Automation Panel
900
Table 64: Link module for the configuration - One Automation Panel 900 via SDL
Automation PC 820
SDL segment length
max. 40 meters
Link: 5DLSDL.1000-00
✓
USB OK
SDVO-B
x
Internal APC620 panel number
Monitor / Panel
connection
independent of segment length
0